The system comprises :

An Aquarium Computer with digital read-out which has connections for a pH probe (Dupla or JBL etc)(not supplied with this unit) , a temperature sensor (supplied) and a LAN connection and lead for connecting to the 6-way socket block

A 6-way socket block with UK 3 pin sockets and mains cable

Algarde Power Centre allows you to connect several aquarium appliances into a single box.

Has two switched connections and a "mains on" light

Also has two unswitched connections, one of which can be used for a combined heater/thermostat or separate heater and thermostat, and the other for any other device

The new Xwave is a high quality, low voltage, high performance wavemaker for the marine or reef aquarium producing high water flow with a low energy cost

The Xwave pump is the ideal tool for moving high volumes of water at a low running cost within your marine aquarium. Like all stream type pumps the Xwave produces a wide, high volume area of laminar, low pressure waterflow which is gentle on coral tissue compared with the narrow directed jet which is obtained using a high pressure pump nozzle.

All Xwave pumps are controllable and come with a remote power supply which offers 5 selectable speeds as standard.

When used with the multi-controller (available separately) the options are even greater with a choice of funtions to tailor the pump output to your specific requirements.

Flow rate: 3,000 to 13,000 l/h
Energy consumption: maximum 25 W
Input Voltage / frequency: 220-240V/50Hz (EU/UK)
Output Voltage: 12/24V DC

The new Xwave is a high quality, performance wavemaker for the marine or reef aquarium producing high water flow with a low energy cost. This Multi-Controller expands the options for use of the pumps into a whole new world of water movement.

All Xwave pumps are controllable and come with a remote power supply which offers 5 selectable speeds as standard. When used with this multi-controller the options are even greater with a choice of functions to tailor the pump output to your specific requirements.

Produces 30 second cycles of flow at 50% power and then 50% power creating wave surges within the aquarium.

Controls two separate pumps on alternating cycles between 50% and 100% power over a 150 second repeating cycle

Controls the two separate pumps on a second different cycle

This program is set up to use a random output of the pump. An irregular combination can produce turbulent currents. The occurrence of turbulence for a few hours per week is beneficial for the reef aquarium as it simulates the de-sedimentation of the stony structures in the reef zones.

A combination process. This program is set to run from Mode A to Mode D and each mode executes for 30 minutes.

This program is set to stop the pump during feeding. After 8 minutes the system is restored to the previous program. During the feeding mode all the function keys are deactivated. The feeding mode minimises the loss of fish and coral food directly into the filter system

This program works with the built-in timer. It can run together with all other programs except for Food Time Mode. When the Night Mode is applied and the time is at the preset night time, (see setting of night time), Night Mode will be executed. The pump will operate at 30% output and the Super-Lux LED will switch on until the night period is over. During the Night Mode all the function keys are deactivated.

With the difference between the day and night environments the organisms inside the aquarium can regain their natural biological clock which enhances reproduction and growth.

Xwave Multicontroller complete with integral lead attached to the super-lux LED

Rubber Suction Cup to hold Multicontroller to tank wall

(Please Note : The multi-plug lead for connecting the Multicontroller to the pump power supply is supplied with the Xwave Pump, not with this unit)

Controls up to 2 pumps of 77w max per pump

Timer range adjustable between 10 secs to 6 minutes

Pumps will be alternately ON/OFF according to the desired set time sequence

Full UK specification : fitted with UK 3-pin mains plug and sockets

Natural Wave Multi-Cycle Pump Timer Wave Maker from Aquarium Systems : the MaxiJet people

Alternating water currents created by the pumps and powerheads plugged into Natural Wave™ mimic actual wave patterns in the ocean, stimulating live corals and providing a more realistic aquatic environment.Varying water circulation can help reduce dead spots and help keep detritus in suspension,allowing it to be more easily captured by filters.

Natural Wave™ has 3 outlets with adjustable frequency – change duration of cycles from 20 seconds to 3 minutes.

Natural Wave™ also has 1 standard power outlet – so that accessories like lights, filters,or heaters may be plugged into the same outlet strip.

Natural Wave™ multi-cycle pump timer is affordable and economical.

Please Note : Image shown is of US version : UK model has same socket block but with 1 standard UK 3-Pin permanent socket and 3 standard UK 3-Pin variable timed sockets.

Complete with 1.5 metres of mains cable & standard UK 3-Pin plug. Unit also has safety overload protection

Timed sockets 1 & 2 : On/Off operating cycles adjustable from 20 seconds to 3 minutes : and output alternates between Socket 1 and 2 (i.e. when Outlet 1 is on : Outlet 2 is off)

Timed socket 3 : On/Off operating cycle is double : from 40 seconds to 6 minutes

Please note that any cycle timing setting will affect all three timed outlets : they cannot be set individually

Dimensions : 360mm x 60mm x 40mm.

For appliances up to 3KW (Max 13A)

15 minute interval setting

Suitable for 230-240V 50Hz AC mains

Simple to operate and set

Simply push down all the time selector segments for the period you want the timer-controlled appliance to be active (ON)

Instant ON override switch

Plug in adaptor that allows equipment fitted with European Schuko plug to be used in a UK mains outlet.

Made of heavy duty rubber material.


Voltage: 240V 50Hz
Fuse: 5A